Massimo 700 Sheave Kit

[Crawdad]

Can anyone tell me which Rhino Sheave kit to order for a Massimo Alli 700?

Anyone done this upgrade before? Looking for more low end. Any comments are appreciated.

[4getful2]

Before starting all this. You should ask yourself..............Am I going to stick with this size tires?
If yes, then no need to change sheaves. an old clutch will wake up what you are wanting and maybe some overdrive slider weights.

[4getful2]

EPI orange clutch spring

[Crawdad]

Keeping same tire size. Less than 200 miles on bike. Looking for more low end and Ive read sheave kit is one of the best upgrades.

[4getful2]

When I did mine,I machined the inside ramp a bit so the weights would go in farther, not much about a 1/16"-just flush with the casting part, this made the sheaves move closer together, belt at top of pulley, so you have a slower starting point. match that and the stiffer orange spring and it pulled like it should. I do alot of trail riding and hills and rarely use low range, unless to pull someone out.

[Z-Rider]

EPI orange clutch spring

Assuming this is for an 05/06 Rhino 660?

[4getful2]

Assuming this is for an 05/06 Rhino 660?

You are correct.

[Z-Rider]

You are correct.

Thank you!

[Z-Rider]

Anyone have the EPI part number for the orange spring?

[wyodlr]

YD53 for the orange

[Z-Rider]

YD53 for the orange

YD53 or YDS3?

I’m only seeing a YDS3

[Z-Rider]

Wel I ordered the YDS3 spring last night. Hope it’s the correct one.

[4getful2]

That's the correct one.

[Daveman92789]

Any update on how this turned out? I have to replace my primary due to pitting but not sure if I go back with factory primary or aftermarket like hunterworks