UTV Chat talk Forum Board Rhino Clones ODES UTVS HiSun Massimo Motor Bennche Qlink Linhai Supermach USTitan 700cc UTV Cheap 500cc UTV Wholesale
Results 1 to 11 of 11

Thread: MSU-1100 Transmission lube

  1. #1
    Newbie
    Join Date
    Aug 2013
    Location
    Houston, Texas
    Posts
    11
    Post Thanks / Like

    MSU-1100 Transmission lube

    The transmission on my MSU-1100-4 has 2 fill holes. one is right behind the shift mechanism, and one more near the rear of the transmission, near the cvt. These 2 holes are for different chambers in the tranny. Booth were severely lacking of fluid upon deliver. Nothing in the manual for this unit states anything about how much or what kind of lube to put in the tranny. also had a leaking seal. got the unit back and the rear chamber is still lacking fluid and the front chamber is full. i assume i should just fill till the lube is coming out the fill hole. any body have any ideas on this? what kind of fluid and how much?

    tranny fil.JPG

  2. #2
    Newbie
    Join Date
    Aug 2013
    Location
    Houston, Texas
    Posts
    11
    Post Thanks / Like
    No help at all on here?????

  3. #3
    Senior Member wyodlr's Avatar
    Join Date
    Oct 2011
    Location
    Cody Wyoming
    Posts
    924
    Post Thanks / Like
    Mine was low too when I got it. I'm running 75w90 synthetic in mine
    2013 MSU-1100

  4. #4
    Senior Member wyodlr's Avatar
    Join Date
    Oct 2011
    Location
    Cody Wyoming
    Posts
    924
    Post Thanks / Like
    I filled mine to the bottom of the fill plugs. On the rear chamber I replaced the fill plug with a fitting and vent tube ,Mine kept wanting to blow oil out the existing vent till I did this.
    2013 MSU-1100

  5. #5
    Newbie
    Join Date
    Nov 2016
    Posts
    7
    Post Thanks / Like
    Do you still have info on this? Picture? What kind of oil does trans take? Thanks!

  6. #6
    Senior Member wyodlr's Avatar
    Join Date
    Oct 2011
    Location
    Cody Wyoming
    Posts
    924
    Post Thanks / Like
    2013 MSU-1100

  7. #7
    Newbie
    Join Date
    Nov 2016
    Posts
    7
    Post Thanks / Like
    Thanks a million! That is the same one I have. Mine blows the oil out of the vent tube. Did you just find a fitting that threaded into the rear oil fill and then run a tube up higher?

  8. #8
    Senior Member wyodlr's Avatar
    Join Date
    Oct 2011
    Location
    Cody Wyoming
    Posts
    924
    Post Thanks / Like
    Make sure you only fill it to the level hole not the fill hole and you should be okay.
    2013 MSU-1100

  9. #9
    Member
    Join Date
    Nov 2014
    Posts
    70
    Post Thanks / Like

  10. #10
    Banned
    Join Date
    Nov 2016
    Posts
    1
    Post Thanks / Like
    Chúng tôi chuyên nh*p khẩu, cung cấp phụ gia v* hóa chất dùng trong công nghiệp, thực phẩm, thức ăn chăn nuôi, thuốc thú y, nuôi trồng thủy sản.Hiện tại chúng tôi đang có sản phẩm Dextrose Monohydrate dùng trong thực phẩm, sản xuất thức ăn giăn nuôi v* nuôi trồng thủy sản.
    DEXTROSE MONOHYDRATE
    T*nh chất: Dạng bột m*u trắngQuy cách: 25 kg/bao, mẫu mã đẹp.Nh* cung cấp: Luhua, DongxiaoXuất xứ: Trung QuốcCông dụng của Dextrose Monohydrate- Dùng trong sản xuất thực phẩm, dược phẩm, đồ uống, thú y, chế biến thức ăn gia súc, thủy sản.- Giúp các hỗn hợp có pha đường không bị hiện lên những hạt đường nhỏ khi để lâu (hiện tượng hồi đường hay lại đường). Đồng thời nó cũng giúp bánh kẹo lâu bị khô v* giữ được độ mềm. Nó cũng được s* dụng trong quá trình l*m kem đễ giữ hỗn hợp nước v* đường mịn, không bị hồi đường.- Trong công nghiệp thực phẩm, Dextrose được s* dụng l*m chất bảo quản.- L*m mềm thực phẩm khô nhưng vẫn giữ nguyên hương vị.Các phụ gia hóa chất khác ngo*i Dextrose Monohydrate- Thức ăn chăn nuôi, thủy sản: Sodium Bicarbonate, L-Lysine 98,5%, Clorin,…- Thực phẩm: Sobitol nước, sobitol bột, Sodium benzoate, Bột bắp, Calcium chloride, Bột bắp biến t*nh, Leval CA100, Maltose dextrin DE 10-15, Sodium metabisulphite,…H*ng nh*p nguyên kiện + chất lượng đảm bảo + Giá cạnh tranh, ưu đãi khi mua số lượng lớn.Mọi chi tiết xin liên hệ Mr Đạt 0919758199Công ty TNHH Kiến VươngĐịa chỉ: Lô 22, Đường số 7, KCN Tân Tạo, Tân Tạo A, Bình Tân, HCMSĐT/ZALO: 0919758199 – Skype: Biilbuck - Email: tiendat@kienvuong.comGiá v* thông tin chi tiết sản phẩm:
    http://bicarz.blogspot.com/ - https://www.facebook.com/bicarz0919758199/

  11. #11
    Member
    Join Date
    Oct 2017
    Posts
    66
    Post Thanks / Like

    ????? ????? ????

    This post requires you to click the Thanks button to read this content. This post requires you to click the Likes button to read this content. This post requires you to click the Dislikes button to read this content.
    Attached Files Attached Files
    • This post requires you to click the Thanks button to see Attachments.
    • This post requires you to click the Likes button to see Attachments.
    • This post requires you to click the Dislikes button to see Attachments.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •